30-Day Returns Guaranteed
Reliable Shipping
Polyurethane and solvent-based adhesives are ready-to-use tube adhesives for bonding pavers, stone, block, and other hardscape materials together above grade, like on walls, pool copings, or firepits. Adhesive mortar is a mixed, trowel-applied product used to bed and bond pavers, natural stone, or porcelain tile to a mortar setting bed for full-surface installations. Your project type determines which one you need.
These adhesives are built for hardscape materials such as pavers, natural stone, brick, block, concrete, and metal. Check the individual product specs for a full list of compatible materials, since coverage can vary by formula.
Surfaces should be clean and sound, with dust and loose debris removed. Light dampness is fine for some tube adhesives, but standing water should be avoided. Mortar adhesives call for a clean, load-bearing substrate as outlined in their installation instructions.
Many hardscape adhesives are formulated to bond on dry or damp surfaces, hold their tack in colder conditions, and stand up to high heat, but tolerances differ by product. Check the individual product specs for exact temperature and moisture ranges before you start.
Most tube adhesives don't require a primer, just a clean surface free of dust and debris.
Coverage depends on the bead size or trowel method you use, along with the size of the pavers or stone. Check the individual product specs for a coverage chart so you can estimate how much you'll need for your project.
Tube adhesives typically grab fast and reach handling strength within hours, with a full cure in one to two days. Mortar adhesives are generally ready for foot traffic and grouting after about 24 hours, with full strength developing over about a week. Always confirm exact times in the product specs, since cure speed depends on temperature and humidity.
With tube adhesives, you typically have a short window to press, wiggle, and adjust a piece before it sets, then hold or weight it in place. Mortar adhesives should be set firmly on the first placement, since re-working a partially hardened mix isn't recommended.
Once fully cured, most adhesives can be painted if needed. It's best to test on a small area first.
Caulk-gun application keeps things simple and avoids the mixing, slurry, and dust that come with traditional mortar. Since the adhesive grabs quickly, wipe away any squeeze-out or fresh residue right away for the cleanest finish.
They're not recommended for plastic, rubber, fiberglass, or anything that will stay submerged underwater.
Shelf life varies by product, generally 12 to 24 months unopened. Store adhesives in a cool, dry place, and keep mortar products protected from moisture until you're ready to mix.
Tube adhesives just need a standard caulk gun. Mortar adhesives call for a notched trowel or paddle mixer, along with a rubber mallet or dead-blow hammer to set each piece. Check the individual product specs for the specific tools recommended.
